Defining all Trunks on DNS Server

This procedure describes how to define all trunks on the DNS server.

➢

To define trunks on the DNS server:

1.

In the Azure Portal Home page pane, select DNS Zones.

It’s necessary to configure the Service Provider domain that is used by it’s customers for direct routing registered in Azure DNS, so that it can be configured by the UMP. An A record should be created that points to the SBC site location name (Short Customer name).SBC FQDN. For example:

■

EMEA SBC = emeasbc.audiocodes.be = IP of EMEA SBC

If the customer (name test1) wishes to create a site that uses EMEA SBC, an A record should be created, for example: test1.emeasbc.audiocodes.be.

■

US SBC = ussbc.audiocodes.be = IP of US SBC

If the customer (name test1) wishes to create a site that uses US SBC, an A record should be created, for example: test1.ussbc.audiocodes.be.

Wait for new screens.